De-solder motor wires then re-solder them to decoder facing forward, de-solder blue wire and discard.
Buzz the LED's to verify they light
Re-solder the 1.2K resistors to the negative lead of the LED's
De-solder all parts from this side
With Digitrax DN163A3 Decoder
I had problem keeping these in contact with the decoder. So I soldered a blob to the decoder motor contacts.
I had problem keeping these in contact with the decoder.
cutting weights to accommodate soundchip and speaker
iRoc is Rocrails iPhone/iPad mobile client. It features a throttle and track panel.
Rocrail has an integrated development environment.
This view shows the integrated properties dialog boxes. As well as the throttle, track plan,...
Rocrail has an integrated development environment. This view shows throttle, track plan, global window and Loconet checker.
Showing finished install. Also shows routing and connection points of blue, white, and yellow wires. Note: there is an additional yellow wire...
Orange lead inserted into right brush cap.
Grey lead inserted into left brush cap.
Showing solder points of red and black leads.