Greetings to all, I am a small series manuafacturer from Kiev, Ukraine. Although I registered already several years ago, I was not active here (I...
After a getting a used Canon 50D two years ago, I just discovered there is a neat preset available. When I use it for layout pics, I set it for an...
I've been an N Scaler for 50+ years, but have no DCC experience. A generous friend gave me his MRC Prodigy Advance DCC system which dates from...
Configured to drive 4 slow motion turnout motors and 4 servo motors.
With this option, I decided to use all eight outputs of the SMC4 to drive turnouts. 4 Tortoise motors and 4 servo motors. The Tortoise connections...
Before installation. The relays are driven by the stall motor outputs of the SMC4 and will be used to switch frog power.
Installed. The relays are driven by the stall motor outputs of the SMC4 and will be used to switch frog power.
I converted this plastic box into a housing for one Team Digital SMC4 and its relay driver board plus a Digitrax BD4 which will be used on tracks...
A PCB diagram of the DPDT relay board that will route frog power and turnout status for servo controlled turnout motors.
These DPDT relays will be driven by the Team Digital SMC4 stall motor outputs and be used to route frog power and turnout status indications for...
I installed this temporary panel so my 3 year old son can switch cars at Halland Yard. I'm trying to come up with a throttle for him also. The...
The control panel is made of a small clear plastic box 6.75in.(L) x 3.5in.(W) x 1.25in(H). The panel will be powered by Team Digital SRC8.