Peco code 100 are based on a toy train set geometry and use the same frog angle of 12 degrees for all their offering. They don't have the same...
Loco Buffer is no junk, it is the best interface you can find to link a computer to Loco Net. I have 3 install and they work perfectly. Along...
I am afraid your are only half right. CV8=8 will only reset the AC6000, CV30=2 is irrelevant for both locos. The only way to reset the MTH loco...
Yes your are right about that. It could also be the caboose is too light and the contact with the rail is not adequate to allow a read. Also it...
I was about to suggest the same thing, you beat me to the draw. I yould also install the latest version of JMRI. V3.4 is the current production...
My experience with the PR3 is entirely different than your. I installed 6 PR3 so far on notebooks and PC and on different operating systems. Win...
You arouse my curiosity a decoder in a caboose, I guess for lighting only? What is the make of the decoder?
Geep_fan, can you direct me where I can get further information on that upgrade? I never heard of it. I know the documentation on the Express say...
Geep_fan, the thread is about the Express not the Advance.
This to me is an awkward work around and qualify the Express as a cripple system. Every decent DCC system on the market can easily run locos back...
Personally I don't have a high opinion of the Express, as someone said in a post above, in order to make a potent system out of the Express, one...
If you want sound, you will need JMRI to program your sound decoder. This rule out any MRC product. The Power Cab can be expanded easily and if...
Here is a link for a brief explanation of Asymmetrical DCC. http://www.tonystrains.com/technews/lenz-asy-abc.htm Jack W.
I downloaded the app on my IPod Touch and I found out it only works if there is a WiFi connection available. It should be OK on a phone. It is not...
Mike now that I know your wants and needs I think the Express will be OK. As far as ease of use is concerned, the Prodigy is among the easiest on...
If you want to stay with MRC then I would choose the PA2 over the Express. I my opinion the Express is a cripple system not worth its price. Here...
Digitrax is not a software cie, drivers are developped by a third party. However I agree with George, Digitrax should be clear on their Web site...
George, am I mistaking ? I am under the impression you are using your PR3 in standalone programmer mode. If so ignore all posts pertaining to...
George, there is no need for a power supply when the PR3 is connected to LocoNet, in standalone programmer mode you definitely need a power supply...
I also think you have a set up problem. In the preferences window under "System manufacturer" you should have Digitrax. Under "System connection"...