Brick N Scale Crossing....

Sumner Nov 15, 2020

  1. Sumner

    Sumner TrainBoard Member

    867
    942
    18
    This is a crossing that represents using bricks in the center and sides of the crossing. It also has brick approach roads that one can print but you could use the paved roads also from the 'crossing with a board center' ( HERE ). The crossing is sized to work with ME Code 55 track. You might be able to use it with code 80 if you shim it up or change the thickness in the .f3d file or by some other means.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    You can use the road approaches shown above or come up with something else. The files for printing the crossing on my thingiverse.com account are ( HERE )

    You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ) and a link to where it is on my web site ....

    http://1fatgmc.com/RailRoad/3D-Printer-2/page-34.html

    Sumner
     
    Last edited: Nov 15, 2020

Share This Page