I make and kitbash N scale trucks and trailers from brass and brass etchings also a variety of signals, anyone else make trucks or signals?
Here are a couple of MOW trucks I did not long ago. Southern Pacific MOW boom truck by nscalestation posted Aug 6, 2018 at 3:23 PM Hi-Rail truck made from Atlas Ford F150 by nscalestation posted Oct 28, 2018 at 10:31 PM
Great MOW trucks! I made this operating Hi-Rail MOW truck a long time ago based on a Ron Bearden article. It's DC and I've since switched to DCC, so I don't run it much any more (it never ran very good anyways, but still looks good as a static model)…. As far as signals go, I made a few operating crossing signals primarily out of brass. The cantilevers I made right around the same time NJI came out with theirs (of course!). I've since purchased some 3D printed bells for the tops of these…. Second cantilever made for unusual installation (aside from addition of gate arm wire attachment, stock NJI signal in foreground of first two pics)…. Double-headed signal on left with stock NJI signal on right. Can't remember why I wanted to make this one....
Hi Maletrain, Thanks for your reply, I have pictures but havent worked out how to attach and send yet. O r i can send you an email with pics ? regards Vic
Hi Maletrain, Thanks for your reply, I have pictures but havent worked out how to attach and send yet. O r i can send you an email with pics ? regards Vic
Hi Nscalestatin nice work there. Thanks for your reply also I will post pics when i work it out how to. regards Vic
Thanks for your help Boisecity. Here are a few pics of what i make and have made plus lots of other peices. best regards Vic