COUPLER REDUX!
Reassemble the coupler in coupler pocket, use a 00-90 flathead screw trimmed to a little over an 1/8". Be sure that you're using the hole we just drilled not the original. File the remaining overhang from the "inside" towards the screwhead, flush with the mount. Check for clearance with the trucks but do not reassemble.
-
There are no comments to display.
-
- Album:
- IM F-7 Project Pt. II
- Uploaded By:
- Sizemore
- Date:
- Jan 11, 2007
- View Count:
- 820
- Comment Count:
- 0