Connect Four

The molding dots in the shell need to be removed as they DO interfere with the ride height. Use your prefered electric grinding tool. Before grinding wrap the "chuck" in masking tape. That will prevent marring of the corner edges. The chuck with its gripped sides essentiall turns into a spining peice of sandpaper or grinder in itself. Covering it with tape will prevent you from damaging the shell badly. Also note; keep the dremel tool on a low setting to prevent melting or over grinding through the shell. Not pictured are the mold dots in the cab which also need to be leveled the two closest to the rear of the cab should be removed.