Hello everybody, I wanted to program the decoders of my digitized locos separately from the actual system on a separate test circuit. That's why I put together a DCC ++ center for testing purposes. I have started up the control panel with Rocrail, and everything works, except for the fact that I can not program ZIMO decoders with it. (ZIMO MX600R) If I try this, the CV return value will always be -1. (When writing and reading) But it works for Esu decoders, and Train-o-matic decoders, also with Lenz-Decoders. At my other center (Digikeijs DR5000, and ROCO Multimaus), the ZIMO decoders can be programmed properly. Does anyone else have this problem? With best regards Reinhold
"https://www.trainboard.com/highball/index.php?threads/dcc-issues-with-d-h-10c-resolved.106064/" Have a look at this link, sound like its happening to you, especially if you can program your other decoders using DCC++.
I had already found this post, in the hope that this would solve my problem. Unfortunately, the proposed solution did not work. With best regards Reinhold