I have the complete system I build about 1990 - Universal Bus Extender Card, Universal Serial Interface Card, I/O Motherboard. Input Cards, Output Cards, Analog Interface Cards, Cabs Relay Cards, Detector Motherboards, Optimized Detector Cards, Decoder Cards, Cabs, and lots of spare parts. The system was working fine when I disassembled my layout about 20 years ago. I am in the process of reassembling my layout using DCC. I am looking for anyone who may be interested in these components lots of work went into building them and I will gladly donate all to anyone interested, hopefully not the recycle man.
I use C/MRI with my NCE system, and would have an interest an interest in some of the cards. I am assuming you are using the rs232/rs485 converter card for the serial interface. Please send me a message if still available. Thank you
I used a Computer Bus Adapter (CBACS) card in an expansion slot in an IBM AT, connected to the Serial Interface Card (USIC) with a 50 conductor ribbon cable. Other than that the system is identical to the rs232 system. The detector cards should be the same as the ones still available in the JLC site as Optimized (OD) detectors. I have everything mounted in 3 PC cases but for shipping would have to pull all boards out. Let me know I'd really to find someone who still using this stuff.
The system is yours if your interested, give me a way to contact you off this board we can arrange a way to get it to you, I'm in the Western PA area.
