I used 1/8 in. hardboard splines as a sub-roadbed. I used a spacer row to leave an easy way to route feeder wires. I notched out a slot in the end...
I used 1/8 in. hardboard splines as a sub-roadbed. I used a spacer row to leave an easy way to route feeder wires.
I installed 1/8 in. hardboard as a switchpad to the end of the module. I routed out holes for the SPDT contacts, and clearance for the ground...
with warehouse in background
with a little of preliminary scenery.
Added 1" pink foam, still have 1" to go, I'll be using spline roadbed next.
Second attempt at a module. I used 3/4" plywood for the sides and ends on this module. These legs slide on and off and are secured using wing...
Second attempt at a module. I used 3/4" plywood for the sides and ends on this module. I tried 1/4" plywood sides on the first module,...
42" L x 16" W. This will be part of a set of two 42" modules that will have 6" extenders at each end to bring the standard...
This is a 96" x 15" module set designed to be used for both oNeTrak and Free-moN. Using 6" adapter plates at each end to bring the...
This module will mate up with the Santa Anna River module that has the Right Hand Crossover. It will also include the fire station on the corner...
This is a plan made from Abracadata Concept and Design software of a module that includes the Santa Anna River bridge and RH Crossover. The gray...
Making good progress. Still much work yet to do.