About 95% done
using dry way mud
Road color. Using shaker cans, two coats of grey primer, when dry from four feet above a quick misting with flat black, then another misting of...
Made this static applicator using a PVC fitting that fit the lid of the Woodland static grass bottle lid, hot glued it inside and applied the wire...
Start of my sanding and fuel facility. Made a holding jig so can work on it without it tipping over.
Modeling a wheel shop, was a wheel shop foreman eons ago and kind of fun doing it from memories. The bridge Crain is a cut down Walters bridge...
My friend wanted a strobe on the cab, looks great and this Kato is a very heavy hauler, excellent slow speed, mat do one for myself sometime.
After setting hood in place, soldered wires and being careful not to pinch wires installed cab
Awaiting decoder, Frame is now not electrified. Truck wires now direct to decoder, Headlight change out to sunny white led at 650 Ohms. Cut trace...
My store bought soldering iron holder was light and tipped over very easy, a slight cord tug and fell out of holder. So I McGivered it out of...
Sodered truck leads directly to truck, widein grove at bottom of side slot to let wire move freely as truck swings Light board, cut traces on...
Original Kato, Has a split frame, note the copper contacts that makes this side pos, other side neg. Also if using a metal screws for kadees,...
Note wheel pickup that rubs the copper rub rail. This connection makes this half Positive and the other side is Negative, being the body is an...