Traveling with a model railroad project - ideas wanted

LocoHorn Aug 18, 2014

  1. LocoHorn

    LocoHorn TrainBoard Member

    107
    66
    18
    Hello all,
    I am going to be traveling for a couple weeks but will have plenty of down town. I'm wondering if there are any projects that I can bring with me in a carry on or checked back on the airplane. Is there something reasonable to try to accomplish in my hotel room?
    Thanks,
    Jeff
     
  2. jlundy46

    jlundy46 TrainBoard Supporter

    617
    422
    28
    You could build some structure kits, but you would have to make sure the built items are packed so they are not damaged. If you run DCC, you could install decoders in a couple of locos. If you have room, you could pack one of the Kato track sets, a power pack, and some rolling stock and play trains on the road.

    John
     
  3. John Moore

    John Moore TrainBoard Supporter

    13,396
    12,182
    183
    Having a small cardboard box that is broke down and fits in you luggage with some tape gives you the place to put assembled items. Still have to make sure the assembled box will fit back in the luggage. Then a few small kits that will fit in the box once done. I would use some tape to secure any liquid glue bottle tops if that is used against leakage. Of course the airline tend to go ballistic nowadays for any thing that remotely is hazmat so you would have to be cautious about glue and paint. I would tend to just dip into my railroad library rather than go through the hassle and take along a good book like the White Cascade story about the Wellington avalanche or similar.
     
  4. randgust

    randgust TrainBoard Member

    3,493
    502
    56
    It's been a while since I've had any 'spare time' on the road, but one of the things that worked best for me in the past was decal projects. I'd take the trucks off carbodies, get the painting projects done in advance, and then have 5-6 cars that needed decal work with me. Other than a pair of tweezers and a set of embroidery scissors you don't need much except good protection for the cars/locomotive bodies themselves, and plenty of time. I did my entire 30-car ATSF unit coal train that way.
     
  5. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    I would guess there might be some difference between checked baggage and carry-on items. I wonder what a call to the airline might reveal?

    Myself, I would lean toward what John suggested. Reading materials. Maybe a sketch pad and drawing utensils. And a camera in case there is some railroad activity near by, or some item of possible modeling interest such as an old building...
     
  6. JMaurer1

    JMaurer1 TrainBoard Member

    2,310
    1,729
    53
    I second what Randgust said. When I used to travel extensively, I always had several car bodies (or engine shells) that I could work on in the room. All I needed was scissors (or small Swiss knife with scissors packed in luggage), decal setting solution (small bottle also in luggage), and a paint brush. Occasionally I would bring kits to build but I had to be careful with packing and making sure I had everything needed to build it without having things that would scare security (but if you turn the blade backwards in an Xacto knife they seemed to allow it to pass).
     
  7. umtrr-author

    umtrr-author TrainBoard Member

    2,835
    3,394
    78
    Hard plastic containers like those made for the Rubbermaid brand work well for me to carry laser kit buildings "in progress" - i.e. windows and doors to install and the like prior to the walls being assembled. (I put windows and doors into walls before I assemble the walls.)

    One time I did "stained glass windows" for a church with clear plastic and a bunch of Sharpies.
     
  8. daniel_leavitt2000

    daniel_leavitt2000 TrainBoard Member

    1,356
    21
    32
    Checked bags: I love to decal while out of town. It is tedious and being stuck in a hotel room with nothing to do will help me keep on track. My kit consists of a small tackle box with an xacto, tweezers, various brushes, micro sol, micro set, solvast, and liquid decal film. I also carry small tweezers, a metal ruler and sometimes calipers. Don't forget the decals and model!

    For carry on options, I stick to a magazine and tablet. The TSA is very fickle, and I actually managed to get searched at Dong Murng airport in Bangkok a few days ago because they thought my Shinkansen was a knife.

    So, check the decals. Leave sharp pointy bullet trains at home.
     
  9. ntbn1

    ntbn1 TrainBoard Member

    129
    5
    18
    I am like Daniel. I travel with decaling projects. I have a hard plastic box with partitions in it. Scissors, decals, tweezers, solut
     
  10. ntbn1

    ntbn1 TrainBoard Member

    129
    5
    18
    Try again. I include scissors, tweezers, decals, decaling solutions, undec cars, and a couple small paint brushes. The box is small and flat and fits in my checked bag easily. Carry-ons can be a problem with some security. I got stopped in Canada because of the scissors, but things have eased some in recent times.
     
  11. kmcsjr

    kmcsjr TrainBoard Member

    1,702
    60
    32
    On us flights ive had no problem with locos on carru on and unitrack tools and oil checked. I like running a loco in the room. Many have tables desks or tv stands big enough
     
  12. LocoHorn

    LocoHorn TrainBoard Member

    107
    66
    18
    Thanks for the ideas everyone. I'm in LA this week and stopped by the very nice train store near the Burbank airport. I found a few items that I need. I spent today gathering some supplies from an art supply store, a bead store, and radio shack for upcoming projects. I always find it hard to make time to do that while at home. I am back next week and have decided to bring weathering supplies and rolling stock. Also, I have fence posts and telephone poles to paint. And I've got a day off completely that I was thinking to use that time to get over to Cajon Pass.
     
  13. txronharris

    txronharris TrainBoard Member

    1,081
    475
    36
    Pack some cars/chalks/brushes in a well padded box and practice weathering.
     
  14. Grey One

    Grey One TrainBoard Supporter

    8,903
    3,622
    137
    If a project gets too big to carry home you might be able to ship it back.
     
  15. LocoHorn

    LocoHorn TrainBoard Member

    107
    66
    18
    Spent some time in the hotel today painting the parts for utility poles and fence posts. I hand painted the poles with several different cheap acrylics. I dunked the cross pieces and fence posts in various watered down paints before wiping dry. Then rolled everything in powdered chalk to tone it all down. I still have to figure out braces for the cross pieces and insulators. ImageUploadedByTapatalk1409105167.136543.jpg ImageUploadedByTapatalk1409105833.639367.jpg ImageUploadedByTapatalk1409106061.905726.jpg ImageUploadedByTapatalk1409106175.905557.jpg

    Tomorrow I'm headed to Cajon. Next hotel modeling project is freight car weathering.
     
  16. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    What supplies and tools did you decide to pack?
     

Share This Page