A short while back I'd designed and printed some wall sections. They were ok but the walls were made of blocks in a repetitious pattern. I wanted the option of printing some wall that looked more like stone walls where the stone blocks were in a more random pattern. I designed 3 wall sections where the stones were in different patterns. 'A', 'B', and C' above. You can print those out and use them singly or glue them together in different combinations for walls of different lengths and heights. You can also flip them upside down for more options. I first made a sketch of some options that could be printed out. I made files for any of the options you see above that can be used to print wall sections. In addition to those files I also created some designs and files for walls that were different heights and lengths so you wouldn't have to always glue smaller sections together. You can also print out a length of cap stone that you cut to length to use on the top of the wall and possibly the ends if you want. I spent about 15 minutes and painted one of the sections that is 12 ft high and 24 feet long. Not sure why the picture came out so yellow as if it more sandy brown in the areas that show up yellow above.I'm pretty happy with the results and will move onto something else now. If you have a 3D printer or access to one you can get to the printer files using this link .... http://1fatgmc.com/RailRoad/3D-Printer/page-12.html Sumner
