ESU Loksound WiThrottle Issue

I have a Kato F40PH that I bought with a LokSound decoder pre-installed. When I try to run the loco with WiThrottle there's no sound, and WiThrottle only shows HEADLIGHT, BELL, HORN as available functions.

If I run the loco with my NCE PowerCab, F8 will turn the sound on/off without a problem. I just can't see this function when running with WiThrottle.

My setup is a NCE PowerCab hooked to JMRI running on a Raspberry Pi through the NCE USB interface. WiThrottle is running on a Kindle Fire connected through WiFi to the RPi.

All my other locos run fine and show a full list of available functions on the WiThrottle.

Any thoughts on how to fix this?

 

One other thing...I reset the decoder via CV8, and that didn't seem to fix the problem.

 

In the JMRI Roster window select the loco. Then click the Labels and Media button. Add labels for the missing functions. Should work after that.

George
Edgewood WA