This transition from main to small grade into the siding was causing my VO1000 to bottom out. I shimmed the approach and got rid of the bottoming,...
Kids Gone Choo Choo. My boys love trains. Everything wired last night and weathered today and the boys are helping me test it out.
It fits just right. Clearance is tight, but it'll go right through the building. I enlarged the door openings, but may enlarge them a little more...
I used ME code 55 and glued it down with tack glue. Paint bottles weigh it down.
I needed something to fill a gap in the ramp down to Clyde and Dales Barrel Factory. I used TrueScene scenic fiber. It left a bunch of fibers on...
I used RR Tools 3-1 tool as a heat sink, but I still melted the ties. So on successive feeders, I used mini alligator clips instead.
Tinned and bent and ready to solder on.
It's just about tracked. I still need to glue down the warehouse track, but the rest is done. Ground throws working.
I thought I had this thing all lined up when I glued it down, but something happened. Luckily I used tack glue and was able to wet it, loosen it...
1st run. I've wired and tested the Alaskan Steamship Siding and one portion of the main track.
I drilled progressively larger holes to route the stem, wiring and acuating arm of the NJ. International Crossing Gates. The wiring gets routed...
NJ. International Crossing Gates drilled and fitted.
I needed a trench to make the track head level with the concrete in this area. I scraped out the top layer of cork. The track runs through the...
I needed a trench to make the track head level with the concrete in this area. I scraped out the top layer of cork.
I'll be installing these Gold Medal models railings in the sidewalk here.