Hi Gary, To be able to use more pins I used a chip called MCP23017-E/SO I2C 16 bit I/O expander. I used it for output in my Relay board (see my...
My thoughts go more in the direction of having the DCC++ on the Arduino controlled by JMRI on an Raspberry Pi. JMRI can put a webserver "in the...
Hi Chi, I'm having CV read problems as well and followed Gregg's lead. I tried lowering this value, first to 25, later to 20. The loc on the...
Hi Gregg, I'm having CV read problems and followed your lead. I tried lowering this value, first to 25, later to 20. The loc on the programming...
Peter, thanks for your link. This shield operates with the same chip, the LN298P. This chip can supply max 2 Amps per channel, that means 2 Amps...
Okay, I hooked up my PowerPax programming track booster and still can not read the most basic things, like address and manufacturer info. I'm...
Hi Peter, Would you have an address (URL) for that shield? I will try again to program the decoders on the programming track. I have hooked the...
Hi Bill, there's no need to understand all the code. I haven't looked into the code (yet ;-) ). It's relatively easy to load the code and upload...
In the thread I mentioned in my last post, two changes are mentioned. Mad those and DCC++ is starting to function. Could not switch on and off...
I made the same changes and things work. I got the same problem with the power being on all the time. Until I realised that I had the power...
Crusader, thanks for your response. In the mean time (okay, I should have done that before...) I found at least partial answers in this thread....
Hi guys, I got me a Velleman motor shield on an Arduino UNO. This motor shield is supposedly 100% compatible with the Arduino one. I downloaded...
Hi y'all, My name is Gerard Wassink, I'm from 1957, so almost 60 years old (or young) now. My layout is a freelance railroad, "Washtown &...
