Jim, Is this really more expensive than buying three decades old printers and a 1000 ribbons? Printing white is a rare need, and these...
FYI: for folks with money, Epson Surecolor printers are capable of printing white and silver. They are production printers costing about $5k and a...
Gerberg’s is available online at: http://guidetozscale.com/ with modest updates to the printed version.
Most DCC decoders have a DC mode option. If set, there is no problem. DC on DCC most probable outcome is up in smoke.
I agree. One of the German companies makes a slow motion solenoid that would be a perfect driver. It would be great to see the post-breakup Rio...
Hobo, I stand corrected. Since none of these kits fits my modeling needs so far, I don't have any experience with them. Mark
I really can't think of any U.S. manufacturers who have appropriate structures available. Probably your best bet are the German makers: Marklin,...
If you don't mind U.S. Tie size and spacing, Atlas makes a good flex track plus #6 turnouts and a 19 degree crossing. One of the big advantages...
An interesting design. Have you looked into the Rokuhan track? It’s a roadbed track that duplicates all the Marklin sections but they have gone...
Cody's Office on MR Video Plus Plus just posted a video on the use of tungsten putty on an N scale car that is applicable to Z. Of course one does...
As I recall, the 3/32" thick sheets available at/through the art supply stores matches up. If you go that way, while you're in the art store try...
Walthers is showing their entire z scale line in stock.
Part of the interest and fun in prototype modeling for me is all the interesting and unexpected consists the railroads come up with. Add to that...
Eric, Both the systems you ask about are so vast and varied it's unlikely that anyone can answer the question. If you are that interested in...
The tungsten filament light bulb works as a current limiter. As a tungsten wire heats up it's resistance increases and increased current flow...
I worked in Silicon Valley for 25 years and the most important thing I learned was to NEVER underestimate the power of dumb luck.
Looks like all my searches are working. Congrats!
I realize the limits for debugging someone else's software, but at this point I've tried to use search over a 5 day period (2/13-2/18), weekdays,...
SO it sounds like the best time to use it is around 3:00AM ?
I've been trying to use the "Search..." in the page header for some months. Every search I attempt returns: The search could not be completed....
