I have an ESU Lok Sound Micro 4.0 in my J Class, F9 is for the rail Clanks
Bachmann 2-8-0 in AT&SF and M1 TCS decoder.
I am presently using the BCD circuit with power up reset. The circuit works great in contolling my turnouts. Due to my ignorance of understanding...
From Micro Scale website:
"Micro Mask is like masking tape in a bottle. Just apply it with a brush, let it dry, and cut it to any...
Thank you for your explanation. I guess I'll leave well enough alone.
Will changing the distance between the cars help on a tight radius?
How would unimate couplers workout?
I am also a NCE Power Cab User. The chip is for an upgrade, there isn't any battery compartment it has to be taken apart. It will control turnouts.
I just purchased a ESU Lok Sound Micro 4.0. with the SoundTraxx 1/2" speaker. I'll post how the install goes.
I used a small drill to go around the fan, then drilled a starter hole in the center of the fan, then drilled the fan out with I think an 1/8"...
I am looking for the correct speaker size for a Bachmann 4-8-4 J class.
Converting my Atlas and MT rolling stock to metal wheelsets.
I have only been to the few shows in Jersey. I wasn't really impressed with the price. I find most of the materials through 2 on line vendors. The...
I know there have been posts about coupler conversions on the older Bachmann 2-8-0. I am looking to see if anoney has done one on the newer...
I am very impressed with your kit bashing.
I have also noticed that Ebay sellers are going crazy with shipping charges. I always check before bidding.
I have just used this combination on a Athearn 50' Reefer. Worked great.
I just converted my Athearn 40' Pfaudler milk car to BX express trucks wo couplers. Also replaced plastics wheels with FVM metal wheel sets....
What method did you use to remove the knobs and the center screw post? Don't know if I am usig the correct terms.
What about using a Z scale 905?