Thanks for all the kind words. This was a fun project to work on and we look forward to bringing many more smiles to Z scale fans!
Yes, the 1 Amp should be fine - even with a bunch of Marklin motors running around. I can't recall the exact power draw of the Markin 3/5 pole...
My current solution (no pun intended) for DCC short circuit protection is four zones of PSX protection. They all have buzzers attached to them,...
Just one person's experience here:
1) I have ZERO experience with the Photon, or any DLP SLA printers.
2) Forget the FDM Printers (Makerbot) -...
The paints are probably similar. Ive also used some stuff off...
I've used EMF shielding paint for years on hundreds of axles. The paint I use is made by GC electronics, but it is no longer available. One bottle...
I take that as a high compliment!
Take a look at this:
It will help answer many of your questions.
I agree - I have quite a few project "on hold" awaiting news of Atlas turnouts!
Any update on the turnouts?
Solus looks like a nice printer. My only issue with it is the print volume size.
At 25 microns it goes down to 48x27x80mm
At 41 microns you get...
look to some of the 3d marketplaces for common stuff. TurboSquid is the place I check first
DC Z-Bend Track displayed last weekend at the Great Model Train Show in Timmonium, Maryland.
I just got done installing a Rokuhan turntable on our new DCC yard. I'm using a Digitrax system. Here is what I discovered the hard way:...
A bit too late I'm afraid, but we would have been happy to help if you had simply contacted us in the beginning.
This is one of the better summaries of the business that I have seen in a long time. It is accurate.
That being said, Hans and I are...
IMHO, the MoPac and Katy both look even better than the WP. They are all stunning.
Please follow the following instructions:
1) DO NOT PANIC!
2) Contact Rob Kluz at Ztrack (firstname.lastname@example.org)
3) AZL *will* replace it.
4) We are...
Two good Z scale links: top one is for a dealer who stocks tons of Z scale - second is for our Z Scale Forum
This made my day - thanks!