Help Identify N scale Locomotive [Solved]

Monnie L Robinson Jun 29, 2020

  1. Monnie L Robinson

    Monnie L Robinson New Member

    5
    5
    1
    Trying to ID this recent mystery buy from garage sale. Just locomotive, no box, no manufacturer brand or model markings on the engine. Under the plastic cover, there is a single lead weight at the rear of the engine. Removing the weight shows a shaft coupling to the motor. There is no front coupling. Single bulb light wired to the front tracks. Train is an EMD F unit with Southern Green and White markings. I would guess Bachmann F9. What is confusing me is all the pics I can find online has motor with front and back shafts and the weight surrounding the entire motor unit.

    Some pics of the engine:

    https://imgur.com/zYvUT8k
    https://imgur.com/Xe2X3VN
     
  2. tehachapifan

    tehachapifan TrainBoard Member

    1,859
    859
    46
  3. RBrodzinsky

    RBrodzinsky November 18, 2022 Staff Member TrainBoard Supporter In Memoriam

    5,685
    2,780
    98
    Looks closest to a LifeLike F7, but with the front drive and weight removed, and motor rotated 90 degrees around longitudinal axis
     
  4. John Moore

    John Moore TrainBoard Supporter

    13,396
    12,182
    183
    It is an early FA unit. The spring powered truck drive line gives it away. Limited pulling power and the most common thing is to have the spring break. Then you find a nice old fat ball point pen and maybe if you are lucky the spring will fit. I used to have some and they were replaced by the Lifelike FA-1 and FA-2 a far superior loco.
     
  5. Monnie L Robinson

    Monnie L Robinson New Member

    5
    5
    1
    Thanks for the info everyone. It does look like a modified Life-Like FA without the front coupling.

    On my DC track it does work, forward, back, front light. The front end of the motor is mounted to a white plastic spacer, but the metal rod stops before it comes out of the spacer in front. There is a magnet placed there touching the plastic, no noticeable places to mount a front coupling. The front trucks are soldered directly to the light.

    Interesting to see such big differences in the early manufacture of these engines. Will keep it has a historical model, no reason to DCC this one.
     
    Hardcoaler likes this.
  6. tehachapifan

    tehachapifan TrainBoard Member

    1,859
    859
    46
    Weird. I guess my first reply is not showing up. It's a Mehano FA-2.
     
  7. Monnie L Robinson

    Monnie L Robinson New Member

    5
    5
    1
    I think I found it on the TroveStar site. Has the same Road or Reporting Number 810.

    It doesn't have the 'Made in Yugoslavia' or 'Made in Slovenia' markings on the tank underside, so it was MRC, AHM or Life-Like from 1969 thru mid-1970's.

    https://www.trovestar.com/generic/zoom.php?id=162399
     
    Hardcoaler likes this.
  8. Monnie L Robinson

    Monnie L Robinson New Member

    5
    5
    1
    Cool to see the differences based on the manufacturer. Looks like the version that appeared shortly after Model Power took over the line is closest to my model.

    http://www.spookshow.net/loco/yugofa2.html

    Thanks for everyone's help! Nice to track this down. Makes it more fun to run!
     
    Hardcoaler likes this.
  9. acptulsa

    acptulsa TrainBoard Member

    3,344
    5,868
    75
    So, where's the question about the EMD? :confused:
     
  10. Doug Gosha

    Doug Gosha TrainBoard Member

    3,595
    7,664
    80
    There is NO question that it is a Mehano FA-2 Tehachapifan is correct. And, TF, I saw your first post. I guess others didn't or...

    Doug
     
    Last edited: Jun 30, 2020
    tehachapifan and Hardcoaler like this.
  11. acptulsa

    acptulsa TrainBoard Member

    3,344
    5,868
    75
    Thanks for the look inside your museum piece. It's even more fun than side valves, an updraft carb and contact points.
     
  12. Doug Gosha

    Doug Gosha TrainBoard Member

    3,595
    7,664
    80
    These were first imported by MRC in about 1968 - 1969.

    Doug
     
    Hardcoaler likes this.
  13. Doug Gosha

    Doug Gosha TrainBoard Member

    3,595
    7,664
    80
    How about a flat-head V8?

    :D

    Doug
     
  14. Doug Gosha

    Doug Gosha TrainBoard Member

    3,595
    7,664
    80
    Also, there are even more variations than Mark indicates because Mehano used various parts at any time. Yours, for example, still has the earlier motor (with a "chrome" frame instead of the more common black) but the spring between the motor shaft fitting and the gear tower fitting.

    Doug
     
    Hardcoaler likes this.
  15. acptulsa

    acptulsa TrainBoard Member

    3,344
    5,868
    75
    It has all of that except the updraft carburetor.
     
    Doug Gosha likes this.
  16. brokemoto

    brokemoto TrainBoard Member

    1,685
    748
    45
    .......how about dual points on Chrysler hemis?
     
    Doug Gosha likes this.
  17. Massey

    Massey TrainBoard Member

    1,982
    6,264
    53
    Points... HA! I bought an older motorcycle that the previous owner couldn’t get running. He bought a new carb, had the head rebuilt, new battery and a few other things. He was asking $500, I got it for $350. After money exchanged hands and I had the title in my hand, I took off the points cover and seen the corrosion, took out a file, cleaned the corrosion off, kicked it over a few times and ended up riding it home! The look on his face was priceless. He had no clue what points were, how to check them or even what they did. Funny thing is he took them out of the head to get the head rebuilt! I talked to him later he thought that they were part of the charging system. It’s funny how so mane mechanics today have no clue what points are or how they work... on and let’s not even mention dwell or the o-scope engine analyzer. Lol.
     
    bremner and Hardcoaler like this.
  18. Doug Gosha

    Doug Gosha TrainBoard Member

    3,595
    7,664
    80
    My 1959 Chevy had NO pollution control on it, at all. The crankcase just vented to the outside air through a tube that ran down toward the ground. The only vacuum tube was to operate the vacuum advance in the distributor. Exhaust gas recirculation? Right.

    :D

    Doug

    Doug
     
    Hardcoaler likes this.
  19. acptulsa

    acptulsa TrainBoard Member

    3,344
    5,868
    75
    I thought GM was still clinging to vacuum wipers in '59.

    The faster you go, the slower they go!
     
    Doug Gosha and Hardcoaler like this.
  20. Massey

    Massey TrainBoard Member

    1,982
    6,264
    53
    In the trucks yes they did... the cars were electric around 55 to 57 depending on the model.
     
    Doug Gosha likes this.

Share This Page