Running locos for the first time...

BNSF FAN Mar 11, 2020

  1. MK

    MK TrainBoard Member

    3,496
    4,798
    82
    Trainz!
     
  2. bremner

    bremner Staff Member

    6,267
    6,247
    106
    I prefer something real.. ish
     
    Mo-Pac and BNSF FAN like this.
  3. BNSF FAN

    BNSF FAN TrainBoard Supporter

    9,892
    29,169
    148
    You should tell your wife that the model railroad is a 3D reality hands on video game. :D
     
  4. bremner

    bremner Staff Member

    6,267
    6,247
    106
    I told her that DCC is computer science, I work for a hosting company.
     
    BNSF FAN likes this.
  5. NorsemanJack

    NorsemanJack TrainBoard Member

    2,264
    946
    51
    I only own Kato (other than one remaining IMR item listed in the swapmeet thread). None of this matters with Kato. They run perfect all the time. It doesn't matter if they've sat for 1 year or 1 decade. Same reason I only buy Toyota cars. (okay, some of that was hyperbole, but not very much of it....).
     
    Mo-Pac, Martin Station and BNSF FAN like this.
  6. Mo-Pac

    Mo-Pac TrainBoard Member

    738
    981
    21
    All of my Atlas fleet have slow speed motors including my newer life likes. I have about 25 locomotives, I too sold my extra locomotives that were from different road names. Top speed on them are about 10 to 15 MPH higher than track speed of 65 or 70 MPH. East coast forget about it! Those trains are WAY TOO slow!
     
    mtntrainman and BNSF FAN like this.
  7. Inkaneer

    Inkaneer TrainBoard Member

    4,325
    1,424
    77

    A lot of trains in the East are unit coal trains going to power plants. The coal is pulverized so it can be blown in to a firebox for a steam plant much like fuel injection on an automobile. Train speed is limited to 40-45 mph to prevent the coal from flying out of the cars. Also the coal is loaded higher in the front of the car than the rear. As the train travels the coal settles and moves back in the car rather than flying out onto the right of way. There is no more four track main lines like there used to be. Two tracks is it although some areas may have three where traffic is heavy. So if you have a train with perishables and the rule book says you can go 65-70mph but you have a unit coal train ahead of you that the rules say can only do 40mph; guess what speed you will do?
     
    Mo-Pac likes this.
  8. Mo-Pac

    Mo-Pac TrainBoard Member

    738
    981
    21

    Back in the eighties, on the then regional railroad the KCS in conjunction with BN they were running coal trains 60-65 heading south through East Texas and Louisiana on single track. Down the road on the Cotton Belt they were hauling everything at a cool 70 MPH. The Missouri Pacific was more 60+ MPH. No, it's not Flat in East Texas.
     
  9. MK

    MK TrainBoard Member

    3,496
    4,798
    82
    No sidings to let the perishables go by?
     
  10. bremner

    bremner Staff Member

    6,267
    6,247
    106
    You should have seen the old Southern Pacific Sunset Route before the Union Pacific got ahold of it....2 mile long sidings every few miles...
     
    Mo-Pac likes this.
  11. Mo-Pac

    Mo-Pac TrainBoard Member

    738
    981
    21
    plenty of mile long sidings. CTC! On the short side of 5000feet to 9300feet from Jefferson to Texarkana alone.
     
    Last edited: Mar 15, 2020
  12. Mo-Pac

    Mo-Pac TrainBoard Member

    738
    981
    21
    Cotton Belt and the MoPac were the same!
     
  13. Tad

    Tad TrainBoard Supporter

    1,270
    662
    37
    After having been out of model railroading for quite some time due to life, illness, kid’s sports, Cowboy Action Shooting, illness, and life, I have recently been working on converting all of my DCC compatible locomotives to DCC.

    I am currently waiting on getting my ~16’x16’ layout room, off of my shop, cleared out when construction on my elk camp, my wife’s “cabin,” gets completed. Then I can start getting the room completed so that I can start working on the “All Day & Night.” I can also have additional through the wall room for staging in my shop. I’m about to bust waiting on all of that.

    [​IMG] [​IMG] [​IMG]

    [​IMG] [​IMG] [​IMG]


    In most of these locomotives, I have been installing XL Systems sound decoders, which are pretty much the same as MRC decoders, except for the price. I’ve been pretty happy with them, so far.

    Most of my locomotives have been sitting in their boxes in tubs for several years. I have been cleaning, lubing, and then letting them run for about an hour frontwards and then an hour in reverse after installation of the decoders.

    That seems to be working out pretty well so far.
     
    Last edited: Mar 16, 2020
    mtntrainman, MK and wpsnts like this.
  14. wpsnts

    wpsnts TrainBoard Supporter

    1,002
    817
    36
    Try the Feather River Rail Society at Portola, CA. It's the real deal.
     
  15. bremner

    bremner Staff Member

    6,267
    6,247
    106
    And 2 days away
     
    mtntrainman likes this.
  16. Inkaneer

    Inkaneer TrainBoard Member

    4,325
    1,424
    77

    Depends on priority. Coal trains go from point to point and then back. So from the mine to the powerplant with coal then empty back to the mine then repeat. There maybe as many as four or six trains involved with one loading at the mine, one unloading at the power plant and two or more in transit, empty and loaded. With modern refrigeration perishables may not command the priority. Besides coal we see other unit trains like autoracks, intermodal and natural gas products. All these share one thing in common. They go from point to point, one way empty, one way loaded. As for sidings, about twelve years ago during the great recession they were used to park unneeded cars. Seen a lot of autoracks parked on sidings for months at a time. The taggers had a ball! Microtrains even modeled one very large one:

    https://www.modelcars.com/microtrains-steel-graffiti-autorack-5pack-1-160

    Obviously not done in one day or night.
     
    Mo-Pac and BNSF FAN like this.
  17. Rich_S

    Rich_S TrainBoard Member

    838
    1,620
    34
    Yes there are. When Microsoft Train Simulator was first announced in early 2001, I actually pre-ordered the software. I ended up creating 3 routes (layouts in MSTS terminology) for that train simulator platform. Of note, Open Rails is a freeware program that will run MSTS routes and has breathed some new life into the MSTS train simulator community. In 2010 I purchased the Rail Simulator dot Com "Rail Works" train simulator and ended up creating one route for that train simulator platform. The company now producing Rail Works is Dovetail Games and the product is now called Train Simulator. Dovetail games also produces another product called Train Sim World, I do not own this product. Another popular train simulator is the Run 8 Train simulator from 3D Train Stuff. 3D Train stuff got their start creating add-on's for MSTS, one of their most popular add-on was the Joint Southern Pacific and Santa Fe Tehachapi route. Some of the niche train games I own and enjoy are Sid Myers Railroad Tycoon, Chris Sawyer Transport Tycoon and Signal Computer Consultants Train Dispatcher. I'm not sure if any of these games are still available.
     

Share This Page