The Old Main Line (v2)

Thieu Jul 29, 2019

  1. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    Years ago, I had built a set of 3 oNetrak modules of 3ft each, picturing the Old Main Line of the B&O. In an autumn atmosphere, with yellow and red trees, the Potapsco River, and a town that looked a litte bit like Ellicot City. Most of the buildings had been scratchbuilt from pictures: some were close to the real buildings, other more a freelanced version of existing ones. Her two pictures of those old modules:

    (21) Eurospoor, 29 oktober 2010.JPG (3) Eurospoor, 28 oktober 2011.JPG

    Lack of space, change in interests, less motivation, it all led to the demolishing of the module set. But I kept the buildings and some of the trees, hoping for better days and a new module.

    In the autumn of 2018, I started with building a new module. Just one, so that saves for some lifting and carrying during exhibitions. The module measures 4ft x 1ft (122cm x 30,5cm), which gives enough space for the buildings of the previous modules. However, there is no space anymore for the Potapsco River and no space for the small railroad bridge. That means: compromises.

    But first, we had a move to a new house, so I had no time, energy or motivation left to do anything with the module. Yet, thanks to a promise to participate in an event in september, I've started last month with the still almost bare module. First task was laying track. Like all technical things, not my strongest point. Eventually, the track (Peco c55) was on it's place, and despite making mistakes with the wiring, it all works fine.

    2019-07-17 (2).JPG

    Since I have no need for new buildings - I reuse all the old ones - the scenery should go rather quickly. I cut a street out of styrene sheet and I created with thin foam a slope on which I glued down the styrene. The sidewalks are also styreen sheet, but with a tile structure. Today, I made the hills out of foam (we use it for isolation), which makes a mess of the living room by the way.......

    The gypsum rocks are drying in the rubber mold. When dry, I will gue them to the hills.

    2019-07-29.jpg
     
    Last edited: Jul 29, 2019
  2. Hardcoaler

    Hardcoaler TrainBoard Member

    10,674
    44,839
    142
    That's very nice Thieu, with a beautiful setting and theme. If I ever have the space to do it, I'd love to work a layout with roughly parallel old and new mains, a la the B&O's Magnolia Cutoff or DL&W's Lackawanna Cutoff with twisty curves on the old and soaring viaducts and straight tangents on the new. Your module captures the Old Road look so well. (y)
     
  3. Amos

    Amos TrainBoard Member

    27
    31
    3
    I thought that said "Old Man Line." I figured that's good for me so I clicked on it. Being a B&O guy, I'm glad I did. Those are great scenes.
     
    Thieu and Hardcoaler like this.
  4. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    Thanks! I hope to get it as good as the previous modules. At least are the buildings the same.

    In the meantime, I have glued the rocks to the foam, and put some modelling clay around the rock outcroppings. I needed to glue some styrene strips under the walls of the buildings, to level them with the sidewalks. The business district of Ellicot Hills is rather small, with just 3 shops, but it goes further behind the hill, of course. :whistle:

    2019-07-30 (1).jpg 2019-07-30 (3).jpg

    I have modelled the depot after the original one in Woodstock (MD). That's a B&O depot, but on the 'wrong' line. However, it was exactly what I needed. I used pictures like this one to make my own version of the building:

    2019-07-30 (4).jpg
     
  5. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    I like seeing the buildings and road not squared to tracks. Not enough folks do it that way. (y)
     
    Hardcoaler likes this.
  6. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    And that's exactly why I do it that way :) On too many layouts I see the tracks, roads and buildings parallel or squared towards each other or the edges of the layout. It makes it a little bit dull and unnatural.

    And especially with older buildings which stood there before the tracks appeared, it is not logical to put them squared to the tracks. There was no serious city planning involved. It also helps to incorporate hills: they force you to follow the terrain and give the roads a more natural course.
     
    Hardcoaler likes this.
  7. Joe Lovett

    Joe Lovett TrainBoard Member

    1,608
    4,575
    62
    Your buildings look great, Thieu!!! And the layout is progressing well, keep up the good work. N scale is the best.

    Joe
     
  8. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    All the rocks are in place now, and I have put a layer of modelling clay around them. Next step will be painting the rocks.

    I have also built a platform at the depot. I decided to go for bricks. Around the platform, there is a line of natural stones (well, some thick styrene strips in which I carved the stones...). Since the track isn't straight, it wasn't very easy to make the platform, but I think it looks OK.

    The small building left from the middle has a wooden fence (also styrene...). I have scratchbuilt that house many years ago, with the coachmans house of Hayfields Farm (Baltimore County) as the example.

    20190804_171708.jpg
     
  9. BNSF FAN

    BNSF FAN TrainBoard Supporter

    9,892
    29,164
    148
    Coming along nicely Thieu! (y):)
     
  10. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    Colored the rocks, installed the telegraph poles, and glued (most of) the buildings on their place.

    20190816_091032.jpg
     

    Attached Files:

  11. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    Painting the soil in a basic brown. The first grey ballast has been glued down. The outhouse is in the garden, ready for someone to use it.

    2019-08-18 (6).jpg
     

    Attached Files:

    Steam-Monsters, Kurt Moose and MK like this.
  12. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    I have no problem with scratchbuilding houses, but I can't handle laser cut kits..... Even this small one - a set of 4 rail end bumpers - gives me a headache. I prefer the plastic bumpers from Walthers, but it is difficult to find a set, so I ordered a set made by Osborn Model Kits. The set includes parts for 4 bumpers. But when I tried to get the parts out of the wooden sheet, one of the parts brook in half. Hm. Luckily, I only need two bumpers. After some cursing, I managed to glue the parts together and create two bumpers. After the glue has set, I painted them red. And yes, one of the bumpers just broke when I touched it with the brush...... Pffff....... Imagine what happens when a boxcar is parked against these things.......

    The broken bumper will be put on the track behind the factory.

    2019-08-21 (1).jpg 2019-08-21 (2).jpg
     
    Hardcoaler and mtntrainman like this.
  13. mtntrainman

    mtntrainman TrainBoard Supporter

    9,982
    10,816
    143
    I'm with you. Some things should never be made in laser cut wood. The parts I dread the most are windows and door frames. :eek::mad::cautious::censored:

    BTW....the module is looking great (y)(y)(y)(y)
     
    Last edited: Aug 21, 2019
    Hardcoaler likes this.
  14. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    Made some new autumn trees. I managed to salvage some from the previous module, but I need more trees. I took the picture in the evening, so the colours on the picture do not look as bright as are in real life. Hopefully, they will keep their leaves for years to come.

    20190821_202101.jpg
     
    Joe Lovett likes this.
  15. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    The trees have been planted on the module. Now I have to add some bushes, grass and other stuff, to diminish the rather clean look of this small autumn forest.

    20190828_180622.jpg
     
  16. sidney

    sidney TrainBoard Member

    1,235
    2,086
    37
    nice looking
     
    Hardcoaler likes this.
  17. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    I have added groundfoam and small bushes, and dots of grass. It gives the landscape a more finished look.

    2019-09-01 (3).JPG

    Putting the yellow lines in front of the crossing didn't go very well.....I used masking tape, but it didn't stop the watery paint from running under the tape..... So, the result was a yellow flood on the street....... I had to paint the polluted street with dark grey again to correct the problems.

    2019-09-01 (2).JPG
     

    Attached Files:

    Steam-Monsters and Joe Lovett like this.
  18. Thieu

    Thieu TrainBoard Member

    1,530
    345
    38
    As you can see, I am also busy with installing telephone lines...... I have done this before on a small Japanese layout and a German Christmas layout, but this is the first time I use it on a module. Problably not a smart move, these lines on a train exhibition with many operators and their clumpsy hands and sleeves..... But real lines look so much better!

    2019-09-01 (01).JPG
     
    Steam-Monsters and Joe Lovett like this.
  19. BNSF FAN

    BNSF FAN TrainBoard Supporter

    9,892
    29,164
    148
    Those autumn colors look great!
     
  20. Joe Lovett

    Joe Lovett TrainBoard Member

    1,608
    4,575
    62
    Thieu, your buildings and scenery are fantastic!!! The module is coming along nicely. Keep up the good work.

    Thanks for posting.

    Joe
     

Share This Page