The Train Room

These are pictures to share in hope that they may help others futher enjoy the hobby and see what it could be and more.

Sort By: Likes

Sort By...

Filters

Type Filters

Marks Trains 2007 028
Alan C.

Alan C.

The Train Room
0 x

Marks Trains 2007 028

0
191
0
0
19 Jan 2012
ThisSignal Bridge 002 This is a hand (Scractch) built signal bridge Notice the signal box to the right,inside is a 10pin plug that powers all the signal heads and transfers the power to the boards under the layout.
Alan C.

Alan C.

The Train Room
0 x

ThisSignal Bridge 002 This is a hand (Scractch) built signal bridge Notice the signal box to the right,inside is a 10pin plug that powers all the signal heads and transfers the power to the boards under the layout.

0
227
0
0
19 Jan 2012
022608 20201
Alan C.

Alan C.

The Train Room
0 x

022608 20201

0
212
0
0
19 Jan 2012
022608 20191
Alan C.

Alan C.

The Train Room
0 x

022608 20191

0
210
0
0
19 Jan 2012
Signal Bridge 004
Alan C.

Alan C.

The Train Room
0 x

Signal Bridge 004

0
204
0
0
19 Jan 2012
061210 20181
Alan C.

Alan C.

The Train Room
0 x

061210 20181

0
230
0
0
19 Jan 2012
061210 10391
Alan C.

Alan C.

The Train Room
0 x

061210 10391

0
175
0
0
19 Jan 2012
061210 10371 ----- Notice the blue edge card connetor in the picture small 18 gaudge wiring was used between the PM42 card conector and the terminal strip and the 12 gaudge buss I had programmed three power district and R Loop using jmri was alot easer
Alan C.

Alan C.

The Train Room
0 x

061210 10371 ----- Notice the blue edge card connetor in the picture small 18 gaudge wiring was used between the PM42 card conector and the terminal strip and the 12 gaudge buss I had programmed three power district and R Loop using jmri was alot easer

0
213
0
0
19 Jan 2012
061210 10151
Alan C.

Alan C.

The Train Room
0 x

061210 10151

0
154
0
0
19 Jan 2012
061110 08501
Alan C.

Alan C.

The Train Room
0 x

061110 08501

0
205
0
0
19 Jan 2012
060110 20171
Alan C.

Alan C.

The Train Room
0 x

060110 20171

0
198
0
0
19 Jan 2012
042910 15011 Here are my hand made turnouts the curved one were made with the jig but the other one were made with a paper template. overall I saved several hundred dollars but the best part I have got the very best turnouts money couldn't buy and there very DCC Friendly
Alan C.

Alan C.

The Train Room
0 x

042910 15011 Here are my hand made turnouts the curved one were made with the jig but the other one were made with a paper template. overall I saved several hundred dollars but the best part I have got the very best turnouts money couldn't buy and there very DCC Friendly

0
169
0
0
19 Jan 2012
042310 10451
Alan C.

Alan C.

The Train Room
0 x

042310 10451

0
167
0
0
19 Jan 2012
041710 16501
Alan C.

Alan C.

The Train Room
0 x

041710 16501

0
175
0
0
19 Jan 2012
031010 11231
Alan C.

Alan C.

The Train Room
0 x

031010 11231

0
191
0
0
19 Jan 2012
030810 11091
Alan C.

Alan C.

The Train Room
0 x

030810 11091

0
183
0
0
19 Jan 2012
030710 17161
Alan C.

Alan C.

The Train Room
0 x

030710 17161

0
183
0
0
19 Jan 2012
030510 19341
Alan C.

Alan C.

The Train Room
0 x

030510 19341

0
188
0
0
19 Jan 2012
011410 11211
Alan C.

Alan C.

The Train Room
0 x

011410 11211

0
183
0
0
19 Jan 2012
062310 19541
Alan C.

Alan C.

The Train Room
0 x

062310 19541

0
242
0
0
19 Jan 2012
011410 11221
Alan C.

Alan C.

The Train Room
0 x

011410 11221

0
157
0
0
19 Jan 2012
010110 14542---Here are the lift rails the ends are left free to drop into the seats on the other side the screw is to adjust the rail so that it flat and smooth to the other one in the seat
Alan C.

Alan C.

The Train Room
0 x

010110 14542---Here are the lift rails the ends are left free to drop into the seats on the other side the screw is to adjust the rail so that it flat and smooth to the other one in the seat

0
155
0
0
19 Jan 2012
010110 145312 DS64's mounted 2 per board -used cat 5 for wiring to tortoise. when configured this way all wiring can be change for the future just by pulling the board here. ----- with this many boards don't forget to change the I.D's on the 64's cause this will lead to problems.
Alan C.

Alan C.

The Train Room
0 x

010110 145312 DS64's mounted 2 per board -used cat 5 for wiring to tortoise. when configured this way all wiring can be change for the future just by pulling the board here. ----- with this many boards don't forget to change the I.D's on the 64's cause this will lead to problems.

0
156
0
0
19 Jan 2012
Alan C., Jan 20, 2012
Page 2 of 2
    There are no comments to display.