N Scale T-Trak

billmtx Oct 28, 2010

  1. Massey

    Massey TrainBoard Member

    1,982
    6,255
    53
    Welcome! Feel free to add any pic of your module progress here if you want.
     
    DeaconKC likes this.
  2. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    Thanks, stuff on the way, so I should be able to get started in a week or so!
     
    BoxcabE50, BNSF FAN and Massey like this.
  3. WPZephyrFan

    WPZephyrFan TrainBoard Member

    2,454
    1,633
    59
    I'm reminded of what SWIFT stands for... Sure Wished I'd Finished Training".
     
  4. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    Say, can someone tell me what the radius of the usable area from the inside corner to the edge of the inside trackbed on a 14" corner module?
     
  5. BigJake

    BigJake TrainBoard Member

    3,259
    6,172
    70
    If you know/measure the width of the roadbed for unitrack, then subtract half that from the stated (centerline) radius of the curve, you get the inside roadbed radius.
     
    DeaconKC likes this.
  6. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    Yup, found it just a bit ago!
     
  7. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    Found this video of a T-Trak module the kids went nuts over! Enjoy
     
  8. Massey

    Massey TrainBoard Member

    1,982
    6,255
    53
    What video?
     
  9. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    Well rats...lemme try to find it again!
     
    BoxcabE50 likes this.
  10. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    MetraMan01, BoxcabE50, Massey and 2 others like this.
  11. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    Okay guys, for future planning needs, how well do the factory Kato crossovers work, comparing the style with 2 switches to the style with 4 switches as single units? Is one type simpler or more reliable than the other?
     
    Shortround likes this.
  12. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,733
    653
    Well, I have a Unitrack double crossover on one triple module, and the trains negotiate it without any issues. No bobbles or hitches passing through it.
     
    DeaconKC likes this.
  13. Massey

    Massey TrainBoard Member

    1,982
    6,255
    53
    I too have one on a triple and it works great. The wiring for T-trak standards don’t work with it tho, you will need to go BWBW or WBWB instead of the standard of BWWB.
     
    DeaconKC and BoxcabE50 like this.
  14. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,733
    653
    As I use mine alone, no club or others in the vicinity, that is how mine is wired.
     
    DeaconKC likes this.
  15. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    Thanks for that info! To keep things simple then I will just use the "dogleg" style switch. one on each side of the layout and just slice the joining rails.
     
  16. BigJake

    BigJake TrainBoard Member

    3,259
    6,172
    70
    The double crossover uses longer frogs (#6?) compared to a single crossover (#4). Both are very reliable. Doubles are rarely used on prototypes, generally only when space dictates.

    Doubles have black ties, singles have brown wood ties under the points/frogs, and concrete ties elsewhere. If you are using concrete tie double track pieces adjacent/elsewhere, the single crossovers will match them cosmetically.

    The individual switches of the double crossover can be manually thrown individually, but their coils are wired together to one electrical control (all thrown or all open)

    The individual switches of the single crossovers are mechanically linked to a single slider, with a single electrical control.

    I have used a double crossover in the past with no problems whatsoever. My new layout (in progress, not running trains yet) uses both types.
     
    DeaconKC likes this.
  17. BigJake

    BigJake TrainBoard Member

    3,259
    6,172
    70
    As far as wiring the double crossover tracks for a modular setup, BWWB would work if you had balloon modules at the ends, that turned the rear track around, and into the front track. In this case, the double crossover would facilitate a reverse loop, needing a reverse-loop power switch for the balloon module(s). Alternatively, the front (or rear) track in the straight modules could be powered via the auto-reverser.
     
    DeaconKC likes this.
  18. Massey

    Massey TrainBoard Member

    1,982
    6,255
    53
    When wired BWWB the double crossover creates a short, thus the need to go BWBW and use an auto reverser if there is a balloon loop at the end of the run. The T-Trak standards were created before Kato created the double crossovers.
     
    DeaconKC likes this.
  19. DeaconKC

    DeaconKC TrainBoard Member

    1,196
    3,867
    44
    Thanks for pointing this out. Sounds like I would need to have it isolated and have separate feeds to the inner line for home use as a loop and then for show use. I would just have to make sure to mark them clearly or possibly use different types of connectors for the two lines.
     
    Massey and MetraMan01 like this.
  20. Hansel

    Hansel TrainBoard Member

    303
    143
    18
    Long time N scaler, first time T-Trak. Here is a draft plan of the my T-Trak layout. As you can see I like operations and am planning to model an inter city based on the 1920s, running 40 boxcars with steam switchers do the work. "Staging" cars will most likely be done on the outer loop.

    Thoughts? Ideas?

    upload_2022-8-22_10-21-40.png
     
    Mudkip Orange and DeaconKC like this.

Share This Page