I hate wiring

Traindork Jun 27, 2021

  1. Traindork

    Traindork TrainBoard Member

    1,299
    393
    35
    I hate wiring. But the layout is at that stage. Today I drilled a few holes for the feeders, cut some wire, and stripped the ends. Next I need to solder those feeders to the track and tie them all together. Hopefully I'll get that done before the end of the year. I think I'd rather go get a root canal....
     
  2. mtntrainman

    mtntrainman TrainBoard Supporter

    9,982
    10,820
    143
    I hear ya !!

    I have 8 more street lights to wire in town.
    I find all kinds of other things that need to be done...to avoid wiring ! :whistle:
     
    BNSF FAN, MK and Shortround like this.
  3. John Moore

    John Moore TrainBoard Supporter

    13,396
    12,182
    183
    I am with you. Everything is within a 30 inch reach so all turnouts are manually thrown, none of the structures are lighted, and none of the many street lights are lighted. The harbor is not lighted as far as the buoys and lighthouse. I use Kato unitrack and it's plug and play system. The several power feeds are connected to one Kato multifeed which connects to the power pack. What little wiring there is is attach to the underside of the layout using double sided tape. I don't operate with the lights off in the room and being an old geezer generally go to bed with the chickens.

    I had a water tower that was lighted but it soon failed and is now dark. Plus the fact that I am old, have arthritis and have had a stroke also affecting movement thus the easy way out. Use Kato's power routing thus no need of DCC and it's problems.
     
    mtntrainman likes this.
  4. Trains

    Trains TrainBoard Member

    483
    503
    28
    I like it when I was young, but it gets real hard when you get old!
     
  5. Shortround

    Shortround TrainBoard Member

    4,333
    5,040
    93
    Well John, I have most of the same issues. Replace the stroke with military service and I find many far reaching practices to much. So wiring and DCC has become something of a past for me as well.
    Oh well! Just keep moving on the best possible way. ;)
     
    Hardcoaler likes this.
  6. Hardcoaler

    Hardcoaler TrainBoard Member

    10,676
    44,851
    142
    I'm one of those cats who likes wiring. I agree completely completely with your post. Not only has age brought physical challenges, but I need a lot more task lighting than I used to and it's tough to set up under a layout. I try to prepare things on the bench so as to make it easier down there.

    With me it's scenery I don't like working. Not sure why, but it's an element of the hobby that I kinda put up with. I love seeing other's scenic work.
     
  7. BNSF FAN

    BNSF FAN TrainBoard Supporter

    9,892
    29,169
    148
    Used to not bother me but after I messed up my quad tendon, it's a pain to get under the layout to do it so now I have moved to the "hate it" club o_O
     
  8. Doug Gosha

    Doug Gosha TrainBoard Member

    3,595
    7,664
    80
    Trackwork and wiring has always been my favorite pert of model railroading but it has become more difficult due to physical limitations as Dan mentioned. Laying a new siding, wiring it, and watching the first loco/train move on it has always been satisfying.

    Scenery has always been my least favorite part. I wish somebody had invented spray cans of "Scenery Be There" in "grass", "dirt", "hills", "mountains". etc. versions.

    Doug
     
  9. Hardcoaler

    Hardcoaler TrainBoard Member

    10,676
    44,851
    142
    :ROFLMAO: Now that's a great idea! Sign me up.
     
    BNSF FAN and Doug Gosha like this.
  10. mtntrainman

    mtntrainman TrainBoard Supporter

    9,982
    10,820
    143
    Working under/inside all these kitchen cabinets I am using as a base for my layout is now a pita !! Wasnt so bad 9 years ago...but now....:censored::censored::censored::censored:

    Scenery has become my go to enjoyment. It's all done from the top ! (y)(y) Leaning over the layout does make the back sore for a day but it's way better then my knees, back and arms hurting for weeks from being on the floor and all contorted getting under there. :mad:
     
    Last edited: Jun 27, 2021
    BNSF FAN and Hardcoaler like this.
  11. Bookbear1

    Bookbear1 TrainBoard Supporter

    637
    877
    35
    I feel your pain... literally.
    The smaller of the two layouts I have at home is built on a hollow core door. Wiring it done by drilling a hole, pushing a wire through a straw, and then using duct tape to secure, yielding this:
    upload_2021-6-27_10-23-46.jpeg

    The advantage is that I can tilt the layout up against the wall with a brace to hold it out far enough to preserve the scenery so I can work wither standing up of sitting on a roll around stool. The larger layout is built differently and requires trenching and tunneling in 2" if construction foam.
     
  12. bill pearce

    bill pearce TrainBoard Member

    619
    264
    18
    I must say that I find the use of duct tape to be problematic. In my experience, duct tape is only good for binding a woman. It certainly isn't code for using on ducts, and in any house a few year old that has used it, you will see it coming off the ducts. And the wood is a porous surface and duct tape isn't good there. Of course it would be less of a problem if the wood were painted, but then so would the track work as well.

    I have only used screw down clamps for holding wireing.
     
    JMaurer1, digimar52 and BNSF FAN like this.
  13. BigJake

    BigJake TrainBoard Member

    3,259
    6,173
    70
    I think they have that for snow...

    My solution for trackwork and wiring is combined in Unitrack.
     
    BNSF FAN likes this.
  14. Bookbear1

    Bookbear1 TrainBoard Supporter

    637
    877
    35
    SRSLY??
     
    MK, BNSF FAN and Hardcoaler like this.
  15. Carolina Northern

    Carolina Northern TrainBoard Member

    216
    145
    23
    I suspect there is a tongue planted firmly in a cheek.

    Don
     
  16. Bookbear1

    Bookbear1 TrainBoard Supporter

    637
    877
    35
    I hope so.... still, an emoticon might have been helpful. Just my 67 cents worth.

    In any case, the layout rests on a banquet table with folding legs. The slot you may just see on one of the narrow ends of the layout is for the modular control board that moves back and forth between the two layouts as needed, since only one is out at any given time. It slides into that slot, and the top of the control panel rests against the underside of the layout. For that reason, I chose duct tape, since it would allow for the smooth insertion and removal of the control panel. [​IMG]
     
    Last edited: Jun 28, 2021
    Hardcoaler likes this.
  17. OleSmokey

    OleSmokey TrainBoard Member

    930
    2,048
    43
    Yeah, i am right with you. Running trains is so much easier than scenery. But then, scenery looks so good. Can't win
     
    Hardcoaler and Doug Gosha like this.
  18. Shortround

    Shortround TrainBoard Member

    4,333
    5,040
    93
    I agree that duct tape does deteriorate over time and exposure to ductwork air but, how long will the layout stay the same or be exposed to such?
    But hanging the wire with p-clamps allows access to it for attaching other things easier. The tap can be trimed as well.
    Oh well. To each there own.
     
  19. sd90ns

    sd90ns TrainBoard Member

    946
    995
    35
    If it is fragile and expensive, it's motive power.
    If it is messy and in the way, it's scenery.
    And if it doesn't work, it's wiring.
     
    JMaurer1, bigGG1fan, jlundy46 and 6 others like this.
  20. OleSmokey

    OleSmokey TrainBoard Member

    930
    2,048
    43
    Try gorilla tape
     

Share This Page