What was your latest purchase?

Primavw Feb 4, 2012

  1. Mo-Pac

    Mo-Pac TrainBoard Member

    738
    981
    21
    I received a righthand switch to replace the older model one in my yard. Plus I received a pair of fuel cranes for the yard also. I went to Wally World to buy some glue, spray bottles and brushes so that I can start with my scenery for my layout.
    [​IMG]


    Sent from my iPhone using Tapatalk
     
  2. Kevin Anderson

    Kevin Anderson TrainBoard Member

    2,726
    4,177
    77
    Picked this up today from my LHS that’s closing and moving to a new location. This should do the t for my N scale Collection and the modules I’m building.
    It goes with the two other heritage units I got for my coal train.
    [​IMG]
    [​IMG]
     
  3. Run8Racing

    Run8Racing TrainBoard Member

    1,018
    609
    29
    Ummm... just so you know, that NEVER "does it" for the N scale collection. There's ALWAYS something else !!! :)
     
    nscalestation, Carl Sowell and MK like this.
  4. BigJake

    BigJake TrainBoard Member

    3,259
    6,173
    70
    I've ordered:
    1. Kato RS-2 in AT&SF "Zebra Stripe" livery
    2. TCS non-sound decoders for the above and 3 other locos
    3. A new roll of Kapton tape
    4. Yamix N scale treadmill test stand, plus 6 extra axle supports (total supports up to 12 axles)
     
  5. jlundy46

    jlundy46 TrainBoard Supporter

    617
    422
    28
    I've bought another Kato PA1 (UP#605) and a TCS decoder for it, so now I have an ABA set of Alcos.
     
  6. OC Engineer JD

    OC Engineer JD Staff Member TrainBoard Supporter

    12,782
    1,109
    152
    BLI SD70Ace in the awesome EMD demonstrator scheme. I ran this unit many times, and this design is very nice. Air starters not so much, lol, but they operate very smooth. 14045E45-7A5D-4F85-9047-CB29638C9784.jpeg
     
  7. mtntrainman

    mtntrainman TrainBoard Supporter

    9,982
    10,821
    143
    Jerry...I remember the pics of you driving that thing ! (y)(y):D
     
    OC Engineer JD likes this.
  8. eposte12

    eposte12 TrainBoard Supporter

    392
    1,998
    35
    1A62800F-3DD3-4B8E-8F0F-2440384BB584.jpeg Got a sweet deal on these 17 dollars each wish LHS had more
     
  9. Onizukachan

    Onizukachan TrainBoard Supporter

    752
    1,198
    24
    Bunch of unitrack bits and Arizona mineral sand and earth from Mike Fifer.
    D13D3666-F9BD-4843-8D26-8A611B8C4105.jpeg
     
  10. MK

    MK TrainBoard Member

    3,496
    4,798
    82
    That's a huge box of Kato "stuuf"! (y)
     
    BNSF FAN and Onizukachan like this.
  11. Calzephyr

    Calzephyr TrainBoard Supporter

    4,153
    1,149
    74
    That will get you 'up 'n running' pretty quickly.

    Sent from my SM-J737T using Tapatalk
     
    BNSF FAN and Onizukachan like this.
  12. Onizukachan

    Onizukachan TrainBoard Supporter

    752
    1,198
    24
    Hopefully!

    im actually using unitrack on a t track module for the first time ever, so I needed a bunch of short pieces to get the track to line up.
    And if not I have some straights to cut into custom lengths.
     
    mtntrainman and BNSF FAN like this.
  13. jlundy46

    jlundy46 TrainBoard Supporter

    617
    422
    28
    My second PA1 arrived so I now have a trio for the passenger train. Alco Trio small.jpg
     
    Last edited: Mar 3, 2021
  14. OC Engineer JD

    OC Engineer JD Staff Member TrainBoard Supporter

    12,782
    1,109
    152
    Yes! They were sweet rides
     
    Kurt Moose likes this.
  15. jlundy46

    jlundy46 TrainBoard Supporter

    617
    422
    28
    Just ordered a NCE P114 power supply so I can build a portable programming track.
     
    Onizukachan and BigJake like this.
  16. Massey

    Massey TrainBoard Member

    1,982
    6,264
    53
    A freshly rebuilt transmission and transfer case for my truck. But hey, the truck is 20 years old, in pretty good condition, and the cost of the work is still far less than a new vehicle.
     
    Kurt Moose and Onizukachan like this.
  17. Mo-Pac

    Mo-Pac TrainBoard Member

    738
    981
    21
    These three Atlas trainman PS-2 covered hoppers came in the mail. Not bad for $43[​IMG]
    [​IMG]


    Sent from my iPhone using Tapatalk
     
  18. Onizukachan

    Onizukachan TrainBoard Supporter

    752
    1,198
    24
    Got this last week for my wife to replace her 252k worn out 2004 x3.

    EC2C4161-3666-493F-81A5-4EE6D147121A.jpeg

    2019 SE w/tech, with 5 years and 32k still on the bumper to bumper warranty.
     
    oa5599, in2tech, Philip H and 4 others like this.
  19. Massey

    Massey TrainBoard Member

    1,982
    6,264
    53
    Mine is a 20 year old Chevy S10 4wd
     
    Kurt Moose and Onizukachan like this.
  20. Onizukachan

    Onizukachan TrainBoard Supporter

    752
    1,198
    24
    those are good trucks, and worth keeping around. Her x3 needed an engine rebuild, transfer case, driveshaft, windshield, and it would still be a worn out old suv just waiting on the next part to fail.
     

Share This Page