Turntable availability

BoxcabE50 Nov 11, 2019

  1. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    Just curious- Does any manufacturer offer a turntable with a bridge about 5 inches in length? Hopefully not some complex kit...
     
  2. Point353

    Point353 TrainBoard Member

    2,879
    7,585
    71
    Least fiddly is probably the Kato turntable. Bridge length is a bit over six inches. MSRP is about $300.
    https://www.katousa.com/N/Unitrack/Turntable.html


    [​IMG]
     
  3. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    Thinking more along the lines of an end of branch line setting. Where a doodlebug or small diesel might be turned.
     
  4. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    Thoughts on the Bachmann TT? It has a five and one half inch bridge. Close enough to my desired length.
     
  5. Point353

    Point353 TrainBoard Member

    2,879
    7,585
    71
    No experience with the Bachmann turntable and not a fan of their products, either.
    Might be OK if you can buy it from a dealer with a good return policy.

    Presumably you're trying to recreate a scene along the lines of this one:

    [​IMG]
     
    BoxcabE50 likes this.
  6. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    I hope to...
     
  7. John Moore

    John Moore TrainBoard Supporter

    13,396
    12,182
    183
    There is also the Atlas turntable.
     
  8. Hytec

    Hytec TrainBoard Member

    13,965
    6,903
    183
    bremner likes this.
  9. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    Must be open pit.
     
  10. bremner

    bremner Staff Member

    6,267
    6,246
    106
    A second vote for Peco
    [​IMG]
     
    Hardcoaler likes this.
  11. BarstowRick

    BarstowRick TrainBoard Supporter

    9,511
    5,673
    147
    I'm sitting here picking my brain. I remember some early turntables. Someone did put out a small, open pit turntable. It wasn't automated you had to hand turn it. Nothing coming up.

    Knowing you I'm guessing you've already done this. An oogle google search revealed the following: https://www.google.com/search?client=firefox-b-1-d&q=N+Scale+Turntables

    I hope this helps.
     
  12. Hardcoaler

    Hardcoaler TrainBoard Member

    10,676
    44,848
    142
    Arnold Rapido offered a turntable long ago, self-indexing and all, but I think its bridge was a bit over 6". This is mine.

    2019-02-04 Arnold Rapido Turntable Itself.jpg
     
  13. Grey One

    Grey One TrainBoard Supporter

    8,903
    3,622
    137
    Seriously? I have convinced myself I don't want one and now you go and start this thread! Sheesh! It happens I will not be able to have a loop at the far end, (behind the TV), of the GandG. With the FEF-3, a TT would be a good thing. Hmmm, no, No, NO! ☻ Well, maybe.
     
    BarstowRick likes this.
  14. BoxcabE50

    BoxcabE50 HOn30 & N Scales Staff Member TrainBoard Supporter

    67,560
    22,734
    653
    Hmmm. Well, it is looking as though Peco may be the direction of travel.

    Just checking their site, I see they are showing a motorizing kit. Anyone here tried it?

    Also, I am guessing the bridge is Code 80?
     
  15. Hytec

    Hytec TrainBoard Member

    13,965
    6,903
    183
    The approach tracks mate with both Peco C80 and C55. Peco C55 is actually C80 cross-section but with two feet. So mating with someone else's C55 might require imaginative head scratching. If you file 1/4" off below the C55 foot, then you should be able to mate with most other C55's.
     
  16. bill pearce

    bill pearce TrainBoard Member

    619
    264
    18
    I have read where others mate ME code55 with Peco by filing off the part of the rail that id buried in the ties, then using a standard code 55 joiner. Never tried it myself as I don't like the looks of the Peco.
     
  17. rray

    rray Staff Member

    8,277
    9,277
    133
    Actually, Today I wasted the whole day researching N and Z turntables, trying to find a small pit type to use for my Lester WA modeling. I ended up ordering a Rokuhan Z Scale turntable from Japan, which looks horrible, but functions beautifully, and am going to use it for it's drive mechanism and electronics, But I am seriously thinking of mounting the PECO N manual turntable pit over it, and building the bridge custom.

    Anyways, I watched videos of all the operations of all the turntables out there. For what you describe Ken, I think the PECO would suit best. They used to offer a motorizing kit for them, and I have a built up PECO turntable that I converted to Z using their motorizing kit. It uses a Hankscraft store display motor, so it moves slow, but is notorious for overshoot.

    Here is what my Peco NB55 TT looks like after conversion to Z Scale:
    [​IMG]

    The other turntable I considered was the Bachmann. It's also a very small pit type, but has a big shed concealing the motor, and a fairly large operators shack, which was not usually seen on a small turntable. What is clever is their indexing scheme. It must use a gear that has no teeth on half of it, because it rotates to a track position, then stops there for as long as it took to get from the previous index position yet you can hear the motor is still spinning, then it continues to the next stop. These are priced around $100.

    All the turntables I looked at need to be modified to look good, but the PECO is the cleanest and simplest at around $30 unmotorized. I also looked at Republic Locomotive Works Nn3 TT, and they look promising, however I do not think they ever actually made it to the production phase.

    The Kato TT is another nice TT, maybe a bit larger but nowhere as large as the Walthers. It is designed to look like a pit TT but no hole in the layout board is required, and they boast a very proud price.

    For myself, it's all about purchasing a solid mechanism, since I have to build the turntable to match a prototype rather than plug and play.
     
  18. Hytec

    Hytec TrainBoard Member

    13,965
    6,903
    183
    Yup, that's what I tried to describe.
     
  19. Point353

    Point353 TrainBoard Member

    2,879
    7,585
    71
    Fifer presently has two of the PECO turntables in stock.
    Following are two videos about the PECO model - one shows the assembly, while the second covers powering it.
    Note that the rails are removable, so theoretically you could install the rails of your choice.



     
  20. Grey One

    Grey One TrainBoard Supporter

    8,903
    3,622
    137
    Hmm, what if I mount a straight track on a piece of foam and drop it into a pie plate? Hmmm.
     

Share This Page