Kato FEF 844

Trains Feb 23, 2018

  1. Trains

    Trains TrainBoard Member

    486
    519
    28
    Have a chance to buy one cheap, (new).
    Any problems with them?
     
  2. RBrodzinsky

    RBrodzinsky November 18, 2022 Staff Member TrainBoard Supporter In Memoriam

    5,685
    2,786
    98
    none whatsoever. They are fantastic models
     
  3. John Moore

    John Moore TrainBoard Supporter

    13,415
    12,252
    183
  4. jdcolombo

    jdcolombo TrainBoard Member

    1,183
    269
    31
    No problems. One of the best steam engines ever produced in N scale.

    John C.
     
  5. NorsemanJack

    NorsemanJack TrainBoard Member

    2,265
    968
    51
    Very nice locomotive. I was happy that they released the "freight" version. I like the old prototypes more than the current excursion stuff. Kato does a real nice job catering to both audiences.
     
  6. Aron-4449

    Aron-4449 New Member

    8
    1
    1
    Kato fef-3 is an amazing locomotive for n scale. The best one out of athe Kato locomotives I have. It's pulling power is off the charts mines was able to pull 34 car unassisted up my old layout 4%grade on the low throttle setting on my dc controller.new wheel slip nothing just pulls like nothing there
     
    Ghengis Kong likes this.
  7. Aron-4449

    Aron-4449 New Member

    8
    1
    1
    To had I have the excursion version 844.plus the full excursion set
     

    Attached Files:

  8. wombat457

    wombat457 TrainBoard Member

    230
    73
    6
    It's a Kato so it'll be good! All of my engines bar 2 are Kato and have never had an issue with them what so ever. The other two, well, not so much.
     
  9. JMaurer1

    JMaurer1 TrainBoard Member

    2,319
    1,759
    53
    Cheap? You don't want it...I do
     
  10. ldk59

    ldk59 TrainBoard Member

    10
    3
    4
    I just picked up a Freight version KOBO shops w/LocSound and couldn't be more pleased (with the performance & sound)

    Get it, you won't regret it!
     
  11. Trains

    Trains TrainBoard Member

    486
    519
    28
    Just got back from getting the 844, drove 60 miles but got for $115.00. Little dust on it but new.

    Don
     
    Ghengis Kong and Ryan Wilkerson like this.
  12. BNSF FAN

    BNSF FAN TrainBoard Supporter

    10,000
    29,843
    153
    Don, that was a steal at that price. I probably would have driven twice that far to get one at that price. :) Probably the one of the best if not the best running loco I have right now.
     
  13. Aron-4449

    Aron-4449 New Member

    8
    1
    1
     
    Last edited: Mar 3, 2018
  14. Trains

    Trains TrainBoard Member

    486
    519
    28
    Had a little problem not wanting to back up, but after I ran it a while runs very nice.
    Glad I didn't pass it up.
    Did they come with any instructions? This one didn't.
     
  15. W Neal

    W Neal TrainBoard Member

    644
    283
    22
    Got a new one with factory installed DCC for sale. Asking $160. Send me a message if interested.
     
  16. RBrodzinsky

    RBrodzinsky November 18, 2022 Staff Member TrainBoard Supporter In Memoriam

    5,685
    2,786
    98
    Which version did you get? DC, DCC or DCC+Sound? About the only "instructions" for the DC version is how to install the DCC card, and the exploded parts diagram (available on the Kato website). You can download the TCS decoder instructions from the TCS site, if you got it with DCC. If sound version (at which point, you've gotten an absolute steal), things get a lot more complicated, but you can look at the "bulletin" for it on the ESU site.

    Kato FEF page: http://www.katousa.com/N/FEF/index.html (exploded parts diagram under "Maintenance")
    TCS install info: http://www.tcsdcc.com/Customer_Cont...res/N_Scale/Kato/FEF 4-8-4/FEF4-8-4_K6D4.html
    TCS K6D4 manual: http://www.tcsdcc.com/Customer_Content/Literature/Decoders/N_Scale/NDecoderSpecific.htm (click on K6D4)

    ESU sound project info: http://projects.esu.eu/projectoverviews/2?type=steam&order=date (4th one on page: click on the "more" and "functions" highlight)
     
  17. EMD F7A

    EMD F7A TrainBoard Member

    1,250
    148
    26
    I just posted a trade ad looking for one of 'em... if you're not dead set on cash maybe check out my ad on the swap meet? Woohoo!
     
  18. Trains

    Trains TrainBoard Member

    486
    519
    28
    Rick,
    I got the DC one, I don't do DCC.
    Don
     
  19. JMaurer1

    JMaurer1 TrainBoard Member

    2,319
    1,759
    53
    W Neal: you got mail!
     

Share This Page