Here is a great new tool I recently purchased--perfect for applying solvent cement to polystyrene joints with no mess and no marring of the...
I had to I tried 4 types of glue to get the Cat5 keystone jack to stick to the enclosure. None of them worked until I tried the Testors gel type...
Laying the flextrack for the staging deck, second ladder and mid-yard module. A thin bead of glue is flattened with the little wooden block in...
Working on the middle of the yard, for the staging deck. Using cork roadbed, which is glued down as shown here. Cork stacked on the right will...
Four (summer) days after the track was glued down, I take another look at my victims. Peco Code 80 has kinked! erk! The 6-axle SD70M derails...
Four (summer) days after the track was glued down, I take another look at my victims. Atlas Code 55 hasn't budged. The 6-axle SD70M runs...
Four brands glued to a sheet of ply via cork roadbed. On a 13", 330mm curve. Using Liquid Nails Fast! glue. Atlas C55 with an SD70M on...
Four brands glued to a sheet of ply via cork roadbed. On a 13", 330mm curve. Using Liquid Nails Fast! glue. Peco C80, Atlas C55 with an...
Four brands glued to a sheet of ply via cork roadbed. Glued down track, here is: Peco C80, Atlas C55. On a 13", 330mm curve. Using...
Four brands glued to a sheet of ply via cork roadbed. Glued down track, here is: GT Code 80 and Atlas C80 On a 13", 330mm curve. Using...
Four brands glued to a sheet of ply via cork roadbed. Left to right: Atlas Code 55, Atlas C80, GT C80, Peco C80 Cork is glued down, just...
Four brands glued to a sheet of ply via cork roadbed. Top to bottom: Peco Code 80, GT C80, Atlas C80, Atlas C55 Cork is glued down, just...
Following on from my previous experiment with foam, here's a new experiment using "GT" brand flextrack and an 11" radius curve....
Following on from my previous experiment with foam, here's a new experiment using "GT" brand flextrack and an 11" radius curve. My...