So you could have two issues - The way the indexing works is there is a switch that contacts with the hole underneath each track. This is the...
Yes. I had it out on a loop of Unitrack last night. The coaches are on the heavy side and I will need to tweak a couple of reverse curves to get...
Look what just arrived on my doorstep! So excited. First impression is the detail is amazing. [ATTACH]
DM me an email address if you would like a copy of the code I use for the Kato turntable. You would be able to reuse a lot of it.
What are the different boards in this photo? It looks like a servo controller on the left? Interested what the board to the right of the Arduino...
I use the Kato turntable and built an Arduino-based controller so I can move the bridge using DCC Accessory decoder commands. I don't see why you...
There is one in Czech Republic too. Velim railway test circuit - Wikipedia Up to 230km/h on the larger loop. There is a prototype for...
The TAM Valley looks really interesting - thanks for sharing. The HEX Frogger juicer will cover three reversing sections for the same price as...
At 15V 3A the OG-AR is working well with a LENZ command station. With 12V and the lower amperage of the DCC++ the OG-AR isn't tripping as well....
It has to do with the speed of solid state vs. a mechanical relay and more potential for arcing with a mechanical relay. I think with DCC...
I suggest not using a relay-based auto-reverser. There are reports of them causing damage especially with the smaller scales. There are some...
I just built a similar DCC++ EX configuration. I am using a 12V 3A DC "wall wart" and find that is more than enough to run several sound equipped...
I have all that working now. It was relatively straight-forward to switch out the DCC Decoder libraries. I need to spend some more time...
Did you resolve this? You can order all the connectors, housings, crimps and even ready to use cable assemblies from DigiKey. Search for JST PA...
I will have a look at the NMRADCC library. One thing I noticed is that entering a single accessory decoder command from the DCC++ EX CS results...
I have been experimenting with Arduino recently. I started by building a DCC controller for the Kato turntable using the DCC Decoder from MynaBay...
Thank you for posting your detailed analysis Neil. I had the MynaBay circuit and DCC_Decoder library working really well using a LENZ command...
There is a great book of these units available directly from CP....
I received a sample of the tube and end caps yesterday from ClearTec. The material is more rigid than I expected and I think will work quite...
