I agree, so I made this one: [IMG] Andre'
It ain't a saloon without a bar, dancing girls and a drunk or three! Andre'
How many of those you need? I have a bunch I'd be happy to let go. Andre'
There's a can of worms!!!! Take a look at this: http://www.girr.org/girr/tips/tips3/coupler_tips.html Andre'
Bachmann track is lightweight pressed steel track. Its ONLY good for indoors and in a basement it needs to be watched as it rusts quite quickly....
Flash, I used acrylic from a sign shop here in town. For glue I have been using glue for plastic plumbing and electrical pipe. Much cheaper...
Thought I had this brick problem licked.... Turns out a couple of the gear boxes in this Mikado block weren't quite right. Too much noise and the...
The work continues.... As noted before I received a motor from Rocky for the Yellowstone. It came with a different hex coupling than the other...
I screwed and glued a mounting post to the rear of the motor block for the trailing truck [IMG] Then I cut out the windows on the cab...
Did a little work over the weekend, Darn little since the other side of life got in the way too! I discovered the stock Pacific's leading truck...
I also did some patch work around the rear cylinders as they mount area there had been cut up more than needed earlier. [IMG] The trailing truck...
and another chapter in the saga.... It appears that I am indeed building a Yellowstone! After the reworking of the drive assemblies I discover...
Well here's pics of last night's work: [IMG] [IMG] [IMG] [IMG] I also played a bit with the rear drive assy. Someone ahead of me had cut a...
[IMG] [IMG] [IMG] Once the rear drive was fitted I used the same Mikado block and started on the front drive unit. I completed it this...
after two evenings of scratching my head and judicious cutting and fitting I have the following: [IMG] [IMG] [IMG] next post is a few more...
Here's the view of the area in question: [IMG] [IMG] views of a Mikado block in position over the old Pacific blocks [IMG] [IMG] As...
1:29 Yellowstone Kitbash I am in need of assistance with a new project I have acquired. [IMG] [IMG] My problem is the original builder...
Here's a copy of the bench plan. Might help with your input. Room dimensions are 24 X 36 [IMG] Andre'
how many 40' cars can be fit into each spur? Spurs on the angle peninsula starting from botom to top hold: 4, 5, 6 cars. On the other,...
currently its all flat with just a slight grade difference between a couple bench sections due to different window sill heights. I am looking to...