I have started this thread to limit the huge number of individual threads that get abandoned because they're just a single product. First off is a C425 high nose to convert the LL C424. http://shpws.me/IWfO -David
Next up is another nose light... this time the SP nose package with the warning light removed. http://shpws.me/IZbL -David
The SP lights look good and are certainly needed. Don't forget there should be an oval cover plate where the red gyralight used to be, typically held with 3 bolts. The tray also looks like it might be a bit shallow, but hard to say for sure.
I can arrange for that... I don't think the plate is visible enough, too thin. It would add more caricature than character. The tray probably looks shallow because the walls are much thicker than they should be to allow for manufacturing. -David
Any chance on anti-climbers with top-mounted ditchlights? Maybe hollow behind the housings for easy insertion of LED's?
Next is not from shapeways... a set of windows to fit the NRE 3GS21B! http://store.cescalemodels.com/#!/NRE-3GS21B-Laser-Cut-Windows/p/50909092/category=13235329 -David
Ooooooh... I really like that one. As of late I've been working on NY&A 268, which has that kind of anticlimber. -David
I purchased one of those to go along with the GENSET Shell and Brass I purchased from you. All excellent pieces I must add
NS Versions of the 3GS21B genset are up! These models have different headlight and fuel tank setups to match NS 300 and NS 301. Enjoy! http://shpws.me/J7XR http://shpws.me/J7XR -David