Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2001
    Location
    Middle Tennessee
    Age
    73
    Posts
    1,183
    I've been asked for a tutorial on how I build signals. Here 'tis.



    This photo shows the materials required to build my type of signals. We begin with the fret from TrainCat. The kit is D type Signal Masts. Next are 603 LEDs from Richmond Controls, then a cut mast and three uncut masts, some brass sheet I scribed for the snow hoods (will be scissored later), finshed hoods to the left, A couple completed masts, the targets and .030 insulating styrene, and of course some ACC to glue it all together.



    This shot shows the targets with the insulators glued to the back and drilled out for the LEDs. You will want to paint the front of the target to hide the unused hole for the old style light shield (see the four on the right) and the insides of the holes so white is not seen.



    Next, glue in the LEDs. I gently drill out just the styrene a bit larger than the target holes and the LEDs fit fairly snugly. This is a good place to warn you to be very careful handling the tiny LEDs. The wires WILL break if not properly handled. Bear this in mind for the rest of the construction process also. If you put a bunch of these together and don't have some LED failures my hat's off to you.



    Then you glue the support that holds the head to the mast. You want to make sure this is secure and the glue has dried before attempting to mount them.

    Continued next post
    Jim Reising jereising@aol.com
    Visit The Oakville Sub - A Different Tehachapi at: http://theoakvillesub.freehosting.net/
    And on Trainboard: The New Oakville Sub - TrainBoard.com

  2. #2
    Join Date
    Mar 2002
    Location
    San Antonio, Texas
    Age
    69
    Posts
    13,557

    Smile Making N Scale Signals by Jim Reising

    Here is a link the the excellent thread referenced above. This is a link to a post in a larger thread called "The New Oakville Sub," a very nice thread on construction of a complete, large layout. Thanks to Jim Reising for both of these threads.

    Additional search terms:
    wiring scenery dwarf mast pole siding switch turnout electrical layout signaling signals

    Kitbashers...UNITE!
    Please support Trainboard's advertisers. Order from a banner add today!
    Visit My RailImages Album

Similar Threads

  1. Forest in a Flash - Jim Reising
    By Jim Reising in forum How To
    Replies: 1
    Last Post: February 6th, 2010, 07:46 PM
  2. N Scale signals
    By Justin May in forum N Scale
    Replies: 38
    Last Post: August 29th, 2008, 11:56 PM
  3. N scale signals
    By sngltrk2002 in forum N Scale
    Replies: 0
    Last Post: December 11th, 2006, 02:52 AM
  4. N scale signals (SMD)
    By sngltrk2002 in forum N Scale
    Replies: 3
    Last Post: December 4th, 2006, 02:01 AM
  5. Scale Electronic Systems N Scale Signals?
    By Craig Martyn in forum DCC & Electronics
    Replies: 3
    Last Post: March 31st, 2006, 08:23 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •