ncng
May 15th, 2006, 11:58 PM
Reserve Your
Winlock Washington
Northern Pacific Depot
NOW
http://www.trainboard.com/railimages/data/558/Depot-NW_Corner.jpg
Reservations for the COMPLETE plans, instructions, and laser-cut detail sets will be taken until June 15, 2006. This unique set of plans contains detailed step-by-step instructions to build a craftsman quality model of the Northern Pacific depot that was formerly located in Winlock Washington. If you model the Northern Pacific, Great Northern, Burlington Northern, or any of the other railroads that ever ran between Portland/Vancouver and Seattle/Tacoma, then you NEED this depot on your layout.
More pictures of the completed depot may be viewed at:
http://www.trainboard.com/railimages/showgallery.php/cat/500/ppuser/104
The 18 pages of HO Scale plans/templates are derived from the original 1911 drawings to clearly show you how to build this distinctive depot. The 16 pages of step-by-step instructions will guide you through the construction process. Your plans and instructions will come in a 3-ring binder so that you can easily remove and replace the pages as you build your model. In addition, a Yahoo Group has been created to answer any questions you may have while you build this one-of-a-kind depot.
For those that model in other scales, you are not left out! A CD containing all of the drawings and instructions will be available. After downloading the free viewer program, you will be able to print the drawings/templates in your scale!
A set of laser cut windows, doors, and roof supports has been specially designed exclusively for building this depot. The original depot drawings from 1911 were used to make sure they are as accurate as possible. This set contains 158 laser cut parts to make all of the following:
3 Doors with Transom Windows
18 Large Windows (12 over 1)
2 Large Windows (12 lite only)
2 Small Windows (6 over 1)
4 Freight Door Transom Windows
18 Roof Supports, Type #1
16 Roof Supports, Type #2
2 Arched Windows plus 2 Exterior Casings
It is like getting a craftsman kit without the big box.
Prices:
Plans, instructions and laser cut set: $40 plus $6 shipping and handling
Plans and instructions only: $20 plus $6 shipping and handling
Plans and instructions CD: $20 plus $3 shipping and handling
Payment (when notified that your plan set is ready): Paypals (credit, debit, or check) or money orders only. No personal checks.
All profits from the sale of these plans go to help support the Lewis County Model Railroad Club.
To reserve your Winlock Depot today, contact:
David Bond
ncng@intergate.com
PO Box 53
Adna, WA 98522
Winlock Washington
Northern Pacific Depot
NOW
http://www.trainboard.com/railimages/data/558/Depot-NW_Corner.jpg
Reservations for the COMPLETE plans, instructions, and laser-cut detail sets will be taken until June 15, 2006. This unique set of plans contains detailed step-by-step instructions to build a craftsman quality model of the Northern Pacific depot that was formerly located in Winlock Washington. If you model the Northern Pacific, Great Northern, Burlington Northern, or any of the other railroads that ever ran between Portland/Vancouver and Seattle/Tacoma, then you NEED this depot on your layout.
More pictures of the completed depot may be viewed at:
http://www.trainboard.com/railimages/showgallery.php/cat/500/ppuser/104
The 18 pages of HO Scale plans/templates are derived from the original 1911 drawings to clearly show you how to build this distinctive depot. The 16 pages of step-by-step instructions will guide you through the construction process. Your plans and instructions will come in a 3-ring binder so that you can easily remove and replace the pages as you build your model. In addition, a Yahoo Group has been created to answer any questions you may have while you build this one-of-a-kind depot.
For those that model in other scales, you are not left out! A CD containing all of the drawings and instructions will be available. After downloading the free viewer program, you will be able to print the drawings/templates in your scale!
A set of laser cut windows, doors, and roof supports has been specially designed exclusively for building this depot. The original depot drawings from 1911 were used to make sure they are as accurate as possible. This set contains 158 laser cut parts to make all of the following:
3 Doors with Transom Windows
18 Large Windows (12 over 1)
2 Large Windows (12 lite only)
2 Small Windows (6 over 1)
4 Freight Door Transom Windows
18 Roof Supports, Type #1
16 Roof Supports, Type #2
2 Arched Windows plus 2 Exterior Casings
It is like getting a craftsman kit without the big box.
Prices:
Plans, instructions and laser cut set: $40 plus $6 shipping and handling
Plans and instructions only: $20 plus $6 shipping and handling
Plans and instructions CD: $20 plus $3 shipping and handling
Payment (when notified that your plan set is ready): Paypals (credit, debit, or check) or money orders only. No personal checks.
All profits from the sale of these plans go to help support the Lewis County Model Railroad Club.
To reserve your Winlock Depot today, contact:
David Bond
ncng@intergate.com
PO Box 53
Adna, WA 98522